The comparison of device materials of sliding sudare using a prototyping method

Agus Hariyadi; Esti Setyaning Jati; Nabila Afif; Alya Farah Taufiqoh

doi:10.30822/arteks.v6i1.569

Penulis

Agus Hariyadi Department of Architecture and Planning, Faculty of Engineering, Universitas Gadjah Mada , Departemen Arsitektur dan Perencanaan, Fakultas Teknik, Universitas Gadjah Mada https://orcid.org/0000-0003-3617-3790 (tidak diautentikasi)
Esti Setyaning Jati Department of Architecture and Planning, Faculty of Engineering, Universitas Gadjah Mada , Departemen Arsitektur dan Perencanaan, Fakultas Teknik, Universitas Gadjah Mada https://orcid.org/0000-0002-9720-0230 (tidak diautentikasi)
Nabila Afif Department of Architecture and Planning, Faculty of Engineering, Universitas Gadjah Mada , Departemen Arsitektur dan Perencanaan, Fakultas Teknik, Universitas Gadjah Mada https://orcid.org/0000-0002-4660-6310 (tidak diautentikasi)
Alya Farah Taufiqoh Department of Architecture and Planning, Faculty of Engineering, Universitas Gadjah Mada , Departemen Arsitektur dan Perencanaan, Fakultas Teknik, Universitas Gadjah Mada

DOI:

https://doi.org/10.30822/arteks.v6i1.569

Kata Kunci:

Material, Prototipe, Sliding sudare

Abstrak

Sliding Sudare memiliki potensi yang besar untuk dikembangkan lebih lanjut untuk dikarenakan keunggulannya dalam meminimalisir konsumsi energi dengan mempertahankan kualitas visualnya. Sementra ini, bahan yang digunakan adalah bamboo yang tidak dapat bertahan dalam cuaca extrem memiliki dan tidak bertahan lama. Penelitian ini bertujuan menganalisis efektifitas dari alternatif bahan lain berupa stainless steel, plastik, dan bahan alami. Maket model digunakan untuk membuat prototipe dalam bentuk jeruji sepeda, filament 3D print PLA+, dan stik bambu sebagai bahan blind. Bahan bahan ini kemudian dianalisis karakter fisiknya berdasar empat parameter (aspek keamanan, ketahanan terhadap cuaca, proses konstruksi, dan biaya). Dari penelitian ini dapat disimpulkan bahwa jeruji besi memiliki performa tertinggi pada faktor syarat keamanan, biaya, dan proses konstruksi; sedangkan PLA+ dan stik bambu memiki nilai yang lebih rendah walaupun memiliki keunggulan pada faktor syarat keamanan.

Unduhan

Data unduhan tidak tersedia.

Referensi

D Printer GEEKS. 2019. ‘How Long Will a PLA 3D Printed Object Last?’ Guides/PLA. 2019. https://3dprintergeeks.com/pla-3d-printed-object-durability/#:~:text=The environmental humidity%2C rainy weather,with the presence of microorganisms.

Aelenei, Laura, Daniel Aelenei, Rosa Romano, Enrico Sergio Mazzucchelli, Marcin Brzezicki, and Jose Miguel Rico-Martinez, eds. 2018. Case Studies-Adaptive Facade Network. TU Delft Open. https://core.ac.uk/download/pdf/186456109.pdf.

Barozzi, Marta, Julian Lienhard, Alessandra Zanelli, and Carol Monticelli. 2016. ‘The Sustainability of Adaptive Envelopes: Developments of Kinetic Architecture’. Procedia Engineering 155: 275–84. https://doi.org/10.1016/j.proeng.2016.08.029.

Carletti, Cristina, Fabio Sciurpi, and Leone Pierangioli. 2014. ‘The Energy Upgrading of Existing Buildings: Window and Shading Device Typologies for Energy Efficiency Refurbishment’. Sustainability 6 (8): 5354–77. https://doi.org/10.3390/su6085354.

Caroline, Octaviana Sylvia. 2018. ‘Implementing Bamboo Research into Holistic Architecture Design for Creating Thermally Comfortable Interior Environment in Gili Meno, Indonesia’. IOP Conference Series: Earth and Environmental Science 195 (December): 012089. https://doi.org/10.1088/1755-1315/195/1/012089.

Couvelas, Agnes, Marios Phocas, Feray Maden, Maria Matheou, and Duhan Ölmez. 2018. ‘Daylight Performance of an Adaptive Façade Shading System Integrated on a Multi-Storey Office Building’. In 13th Conference on Advanced Building Skins, 423–32. Bern, Switzwerland: ABS. https://gnosis.library.ucy.ac.cy/handle/7/61852.

Dakheel, Joud Al, and Kheira Tabet Aoul. 2017. ‘Building Applications, Opportunities and Challenges of Active Shading Systems: A State-of-the-Art Review’. Energies 10 (10): 1672. https://doi.org/10.3390/en10101672.

Hariyadi, Agus. 2017. ‘Study on Optimization of Visibility and Energy Efficiency of New “Sudare” for Building Façade利用統計を見る’. The University of Kitakyushu. https://kitakyu.repo.nii.ac.jp/?action=pages_view_main&active_action=repository_view_main_item_detail&item_id=595&item_no=1&page_id=13&block_id=294.

Hariyadi, Agus, Hiroatsu Fukuda, and Qingsong Ma. 2017. ‘The Effectiveness of the Parametric Design “Sudare” Blind as External Shading for Energy Efficiency and Visibility Quality in Jakarta’. Architectural Engineering and Design Management 13 (5): 384–403. https://doi.org/10.1080/17452007.2017.1296811.

Hariyadi, Agus, and Fukuda Hiroatsu. 2017. ‘Study of Visibility Indices of Traditional Japanese Horizontal Blind “ Sudare ” Based on the Illuminance Different Level Using Physical and Digital Image Experiment’. BUILT-International Journal of Building, Urban, Interior and Landscape Technology 9: 15–24. https://repository.ugm.ac.id/274045/.

Huang, Kuo-Tsang, Kevin Liu, and Han-Hsi Liang. 2015. ‘Design and Energy Performance of a Buoyancy Driven Exterior Shading Device for Building Application in Taiwan’. Energies 8 (4): 2358–80. https://doi.org/10.3390/en8042358.

Hullmann, Heinz, and Wolfgang Willkomm. 2009. ‘Stainless Steel and Solar Energy in Building Applications’. Belgium. https://www.worldstainless.org/Files/issf/non-image-files/PDF/ISSF_Stainless_Steel_and_Solar_Energy_in_Building_Applications.pdf.

Jayathissa, P., M. Luzzatto, J. Schmidli, J. Hofer, Z. Nagy, and A. Schlueter. 2017. ‘Optimising Building Net Energy Demand with Dynamic BIPV Shading’. Applied Energy 202 (September): 726–35. https://doi.org/10.1016/j.apenergy.2017.05.083.

Liese, Walter, and Thi Kim Hong Tang. 2015. ‘Preservation and Drying of Bamboo’. In , 257–97. https://doi.org/10.1007/978-3-319-14133-6_9.

Liu, Wenjie, Jianping Zhou, Yuming Ma, Jie Wang, and Jie Xu. 2017. ‘Fabrication of PLA Filaments and Its Printable Performance’. IOP Conference Series: Materials Science and Engineering 275 (December): 012033. https://doi.org/10.1088/1757-899X/275/1/012033.

Prayoga, Mochammad Ardi, Hartanto Budiyuwono, and Rahadian Prajudi. 2018. ‘Tata Ruang Dalam Rumah Sederhana Tipe 54 Perumahan Kedung Badak Baru Bogor Ditinjau Dari Pencahayaan’. ARTEKS : Jurnal Teknik Arsitektur 2 (2): 137–48. https://doi.org/10.30822/arteks.v2i1.47.

Tabadkani, Amir, Masoud Valinejad Shoubi, Farzaneh Soflaei, and Saeed Banihashemi. 2019. ‘Integrated Parametric Design of Adaptive Facades for User’s Visual Comfort’. Automation in Construction 106 (October): 102857. https://doi.org/10.1016/j.autcon.2019.102857.

Team Stainless. n.d. ‘Stainless Steel for a Sustainable Future’. https://www.worldstainless.org/Files/ISSF/non-image-files/PDF/Team_Stainless_Stainless_Steel_for_a_Sustainable_Future.pdf.

Vailati, C., E. Bachtiar, P. Hass, I. Burgert, and M. Rüggeberg. 2018. ‘An Autonomous Shading System Based on Coupled Wood Bilayer Elements’. Energy and Buildings 158 (January): 1013–22. https://doi.org/10.1016/j.enbuild.2017.10.042.

Varun Sharma, Anuranjan Sharda, and Vijay Kumar. 2016. ‘Simulation Thermal Analysis of Double Glazed Window with Interpane Chik Blind’. International Journal of Engineering Research And V5 (07). https://doi.org/10.17577/IJERTV5IS070083.

Yoon, Jungwon. 2019. ‘SMP Prototype Design and Fabrication for Thermo-Responsive Façade Elements’. Journal of Facade Design and Engineering 7 (1): 41–62. https://doi.org/https://doi.org/10.7480/jfde.2019.1.2662.

Yoon, Jungwon, and Sanghyun Bae. 2020. ‘Performance Evaluation and Design of Thermo-Responsive SMP Shading Prototypes’. Sustainability 12 (11): 4391. https://doi.org/10.3390/su12114391.