A study on interlocking brick innovation using recycled plastic waste to support the acoustic and thermal performance of a building
Article Sidebar
Published:
Dec 31, 2021
Keywords:
Acoustic, Interlock bricks, Plastic waste, Thermal performance of buildings
Main Article Content
Abstract
The main materials used in producing interlock bricks are clay, sand, and cement as usually applied in the conventional process of making bricks. There is, however, a continuous reduction in the availability of these natural resources due to their non-renewability. Therefore, one of the materials with the ability to support the acoustic and thermal performance of buildings in architecture is plastic. Plastics are categorized as lightweight, non-breakable, non-corrosive, and resistant to weather. Moreover, there is no need for the production of new plastics for this purpose due to the global call for the use of plastic wastes based on their high economic value. Therefore, this research aimed to compile a study on interlock brick innovation using recycled plastic waste to support the acoustic and thermal performance of a building. This was conducted through a review of previous studies on the profile of interlock bricks produced from recycled plastic waste. The findings are expected to provide information on the efficient production of interlock brick innovation using plastic wastes as a component.
Downloads
Download data is not yet available.
Article Details
How to Cite
Ahmed, Heyder, and Sugini. 2021. “A Study on Interlocking Brick Innovation Using Recycled Plastic Waste to Support the Acoustic and Thermal Performance of a Building”. ARTEKS : Jurnal Teknik Arsitektur 6 (3), 335-48. https://doi.org/10.30822/arteks.v6i3.760.
Section
ARTICLES-RESEARCH
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms: (1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal; (2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal; (3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
References
Agyeman, S., N. K. Obeng-Ahenkora, S. Assiamah, and G. Twumasi. 2019. ‘Exploiting Recycled Plastic Waste as an Alternative Binder for Paving Blocks Production’. Case Studies in Construction Materials 11: e00246. https://doi.org/10.1016/j.cscm.2019.e00246.
Al-Fakih, Amin, Bashar S Mohammed, Fadhil Nuruddin, and Ehsan Nikbakht. 2018. ‘Development of Interlocking Masonry Bricks and Its’ Structural Behaviour: A Review Paper’. IOP Conference Series: Earth and Environmental Science 140 (April): 012127. https://doi.org/10.1088/1755-1315/140/1/012127.
Amijaya, Sita Yuliastuti. 2019. ‘Rekayasa Material Plastik Banner Untuk Teknologi Kulit Bangunan (Secondary Facade)’. Media Matrasain 16 (1): 41–47.
Amir, Mardiana, Rita Irmawaty, Muralia Hustim, and Irwan Ridwan Rahim. 2019. ‘Material Konstruksi Dinding Yang Terbuat Dari Pengembangan Komposit Plastik Dan Serat Kenaf Serta Serat Glass’. Prosiding Konferensi Nasional Pascasarjana Teknik Sipil (KNPTS), no. November: 393–405.
Antico, Federico C., María J. Wiener, Gerardo Araya-Letelier, and Raúl Gonzalez Retamal. 2017. ‘Eco-Bricks: A Sustainable Substitute for Construction Materials’. Revista de La Construccion 16 (3): 518–26. https://doi.org/10.7764/RDLC.16.3.518.
Arslan, M. Hakan, and H. Derya Arslan. 2013. ‘Use of Plastic Material for Providing Thermal And Acoustics Comforts in Residence Constructed with RC Tunnel Form System’. CESB (Central Europe Towards Sustainable Building), 301–4. https://doi.org/10.12739/nwsaes.v6i4.5000066927.g5000062294.
Asriza, Ristika Oktavia, Diah Humaira, Sri Hawa Thu Insan, and Zomi. 2019. ‘Sintesis Material Komposit Sampah Plastik Dengan Serbuk Kayu Pelawan (Tristaniopsis Merguensis)’. Prosiding Seminar Nasional Penelitian & Pengabdian Pada Masyarakat 3: 2–5. https://doi.org/https://doi.org/10.33019/snppm.v3i0.1357.
Aubé, Stéphane, Bertin Castonguay, Robert Daoust, and Marcel Thomassen. 2015. ‘Wall with Decorative Facing’. United States Patent.
Awoyera, P. O., and A. Adesina. 2020. ‘Plastic Wastes to Construction Products: Status, Limitations and Future Perspective’. Case Studies in Construction Materials 12: e00330. https://doi.org/10.1016/j.cscm.2020.e00330.
B. Shanmugavalli, K. Gowtham, P. Jeba Nalwin, and B. Eswara Moorthy. 2017. ‘Reuse of Plastic Waste in Paver Blocks’. International Journal of Engineering Research And V6 (02): 313–15. https://doi.org/10.17577/ijertv6is020162.
Bernardi, Lisa, Pedro Gaspar, Javier Ozcoidi, and Manon Randé. 2017. ‘Ecobuild: Plastic Bricks for Sustainable Housing’. Repositori Universitas Pompeu Fabra, 1–60.
Bhushaiah, Rajarapu, Shaik Mohammad, and D Srinivasa Rao. 2019. ‘Study of Plastic Bricks Made From Waste Plastic’. IRJET (International Research Journal of Engineering and Technology) 6 (4): 1122.
Chaurasia, Atul, and Sumit Gangwar. 2019. ‘Reuse of Plastic Bottles as a Construction Material’. IJETR (International Journal of Engineering and Technical Research) 0869 (9).
Chen, Kuo Wei. 2016. ‘Lightweight Brick by Carbon Ash from the Mixed Plastic Waste Treatment Plant’. MATEC Web of Conferences 67. https://doi.org/10.1051/matecconf/20166707025.
D, Maneeth P, Pramod K, Kishor Kumar, and Shanmukha Shetty. 2014. ‘Utilization Of Waste Plastic In Manufacturing Of Plastic-Soil Bricks’. IJERT (International Journal of Engineering Research & Technology) 3 (8): 102.
Danandjaja, James. 2014. “Metode Penelitian Kepustakaan.” Antropologi Indonesia. https://doi.org/10.7454/ai.v0i52.3318.
Deepak, Bansal. 2012. ‘Sustainable Dry Interlocking Block Masonry Construction’. International Brick and Block Masonry Conference. Brazil, 1–11.
Dewangan, Dolly, Pradeep Kumar, Kamini Rathore, Krishna Dwivedi, Avinash Chatuevedi, and Ashutosh Dwivedi. 2020. ‘Utilization of Plastic Waste in Manufacturing of Plastic Sand Bricks’. IJIES (International Journal of Innovations in Engineering and Science) 5 (6): 4.
Fajriyanto, and Feris Firdaus. 2008. ‘Panel Dinding Bangunan Ramah Lingkungan Dari Komposit Limbah Pabrik Kertas (Sludge), Sabut Kelapa Dan Sampah Plastik : Pengaruh Komposisi Bahan Dan Beban Pengempaan Terhadap Kuat Lentur (Bending)’. Prosiding Seminar Nasional Teknoin, Bidang Teknik Mesin, no. January: 55–62.
Ge, Zhi, Hongya Yue, and Renjuan Sun. 2015. ‘Properties of Mortar Produced with Recycled Clay Brick Aggregate and PET’. Construction and Building Materials 93: 851–56. https://doi.org/10.1016/j.conbuildmat.2015.05.081.
Ghofrani, Mohammad, Alireza Ashori, Mohammad Hadi Rezvani, and Farzad Arbabi Ghamsari. 2016. ‘Acoustical Properties of Plywood/Waste Tire Rubber Composite Panels’. Measurement: Journal of the International Measurement Confederation 94: 382–87. https://doi.org/10.1016/j.measurement.2016.08.020.
Hakim, Fadhil Ammar. 2019. ‘Pemanfaatan Bijih Plastik Jenis High Density Polyethylene (HDPE) Sebagai Subtitusi Agregat Pada Bata Beton (Paving Block)’. Dspace UII, 1–11.
Haque, Md Sazzadul. 2019. “Sustainable Use of Plastic Brick from Waste PET Plastic Bottle as Building Block in Rohingya Refugee Camp: A Review.” Environmental Science and Pollution Research 26 (36): 36163–83. https://doi.org/10.1007/s11356-019-06843-y.
Huff, Robert, and Mark Shouldice. 2010. ‘Thin Stone or Brick Veneer Wall System And Clips Therefor’. United States Patent Application Publication.
Intan, Syarifah Keumala, and Sandra Santosa. 2019. ‘Utilization of PTE and LDPE Plastic Waste and Building Material Waste as Bricks’. Korean Journal of Materials Research 29 (10): 603–8. https://doi.org/10.3740/MRSK.2019.29.10.603.
Jasvi, Ali Haider, and D.K. Bera. 2015. ‘Sustainable Use of Low Cost Building Materials in the Rural India’. IJRET (International Journal of Research in Engineering and Technology) 04 (25): 534–77. https://doi.org/10.15623/ijret.2015.0425077.
Juhana, and Sungkono. 2018. “Panel Plastik Bertulang Hemat Energi.” Jurnal Lingkungan Binaan Indonesia 7 (1): 54–59. https://doi.org/10.32315/jlbi.7.1.54.
Kasmudjiastuti, Emiliana, and Arum Yuniari. 2012. ‘Pengaruh Filler PCC (Precipitated Calcium Carbonate) Terhadap Sifat Mekanik, Elektrik, Termal Dan Morfologi Dari Komposit HDPE/PCC’. Majalah Kulit, Karet, Dan Plastik 28 (1): 35. https://doi.org/10.20543/mkkp.v28i1.203.
Kintingu, Simion Hosea. 2009. ‘Design of Interlocking Bricks for Enhanced Wall Construction, Flexibility, Alignment Accuracy and Load Bearing’. A Thesis Submitted for the Degree of PhD at the University of Warwick.
Kurniasari, Angela Evita, Nadya Swastikirana, Ociani Sry Pabinti, and Patricia P. Noviandri. 2019. ‘Pengolahan Limbah Plastik Sebagai Material Alternatif Akustik Ruang’. SMART (Seminar on Architecture Research & Technology) 4 (1): 19–30.
Kurniawan, Oki. 2014. ‘Studi Penanganan Kebisingan Untuk Memperbaiki Kualitas Akustik Ruang Kelas Melalui Pemanfaatan Sampah Kotak Karton Gelombang’. https://doi.org/10.13140/RG.2.2.10517.42727.
Mageswari, Dr.M., J.S. Chiranjeevi, and K. Magesh. 2018. ‘Plastic Bricks’. IRJAET (International Research Journal in Advanced Engineering and Technology) 4 (2): 3167–72.
Manisha, and Navinderdeep Singh. 2017. ‘Investigating Strength and Properties of Ecoladrillo: Eco Bricks’. International Journal of Civil Engineering and Technology 8 (7): 134–42.
Mansour, Ashraf Mansour Habib, and Subhi A. Ali. 2015. ‘Reusing Waste Plastic Bottles as an Alternative Sustainable Building Material’. Energy for Sustainable Development 24: 79–85. https://doi.org/10.1016/j.esd.2014.11.001.
Maowa, Jannatul, and Muhammad Harunur Rashid. 2018. Utilization of Waste Plastic in Manufacturing of Brick. International Energy & Engineering Congress.
Martins, G., F. Antunes, A. Mateus, and C. Malça. 2017. ‘Optimization of a Wood Plastic Composite for Architectural Applications’. Procedia Manufacturing 12 (December 2016): 203–20. https://doi.org/10.1016/j.promfg.2017.08.025.
Mondal, M. K., B. P. Bose, and P. Bansal. 2019. “Recycling Waste Thermoplastic for Energy Efficient Construction Materials: An Experimental Investigation.” Journal of Environmental Management 240 (May 2018): 119–25. https://doi.org/10.1016/j.jenvman.2019.03.016.
Mufika, Neyla Rohmah, Sri Murni Dewi, and Eva Arifi. 2018. ‘The Effect of Plastic Concrete Use on Lightweight Hollow Concrete Brick against Compressive Strength and Flexure Strength With Variations of Fiber Yarn’. Jurnal Mahasiswa Jurusan Teknik Sipil 1 (2).
Muttaqim, Zaennal, and Agus Dwi Anggono. 2017. ‘Pengaruh Variasi Komposisi Antara Limbah Plastik High Density Polyethylene (HDPE) Dan Abu Dasar Batubara Sebagai Material Komposit Dengan Matrik Semen Terhadap Kekuatan Tekan Dan Serapan Air’. Karya Ilmiah Universitas Muhammadiyah Surakarta.
Muyen, Z, TN Barna, and MN Hoque. 2016. ‘Strength Properties of Plastic Bottle Bricks and Their Suitability as Construction Materials in Bangladesh’. Progressive Agriculture 3 (27): 362–68. https://doi.org/https://doi.org/10.3329/pa.v27i3.30833.
Ni`mah, Lailan, Isna Syauqiah, Agus Mirwan, Doni Rahmat Wicakso, and Hesti Wijayanti. 2019. ‘Batako Dari Limbah Botol Plastik : Tinjauan Kuat Tekan’. Al Ulum Sains Dan Teknologi 5 (1): 26–29.
Nugroho, Samsu Adi, Muhammad Dikri Fadilah, Thesalonika Br Ginting, and Asri Nurdiana. 2019. ‘Hexalock Brick : Inovasi Batako Pendukung Konsep Pre-Febricate Building Yang Ringan, Ekonomis Dan Ramah Lingkungan’. Jurnal Proyek Teknik Sipil 2 (1): 25–30.
Pati, Dibya Jivan, Riken Homma, and Kazuhisa Iki. 2015. ‘Plastic Bottle Masonry as Alternate Solution to Housing Problems in Urban Areas of India’. Applied Sciences, Engineering & Technology, no. October.
Patil, Ushadevi, Dheeraj Chavan, Yogesh Rai, Rushikesh Surwase, Tejas B Thombare, Sujit B Patil, and Akshay Shinde. 2018. ‘Utilization of Waste PET Bottles and Brick Kiln Dust as Construction Material for Low Cost Housing’. International Journal of Research in Engineering, Science and Management 1 (6): 13–15.
Pradono, Budi. 2019. ‘The Interiority of Proximity Between Nature and Architecture in Contemporary and Tropically Context with Cases Studies’. ARTEKS : Jurnal Teknik Arsitektur 3 (2): 129–44. https://doi.org/10.30822/arteks.v3i2.63.
Pramitasari, Putri Herlia. 2017. ‘Panel Dinding Berventilasi (Breathing Wall) Pada Selubung Bangunan Di Daerah Beriklim Tropis Lembab’. Spectra XV (29): 1–12.
Prastyatama, Budianastas, and Anastasia Maurina. 2018. ‘Kinerja Struktural Interlocking Compressed Earth Block (ICEB) Dengan Serta Ijuk Sebagai Stabilisator’. ARTEKS : Jurnal Teknik Arsitektur 3 (1): 27–36. https://doi.org/10.30822/arteks.v3i1.51.
Pratikto. 2010. ‘Beton Ringan Ber-Agregat Limbah Botol Plastik Jenis PET (Poly Ethylene Terephthalate)’. Jurnal Rekayasa Sipil 9 (1): 1–8.
Previatti, Bruna, Carolina Werlang Fazenda, Fernanda dos Santos Machry, and Rafaela Diehl Milani. 2016. ‘Análise de Implantação de Uma Residência Sustentável Em Passo Fundo - BR’. Seminario Internacional de Construcoes Sustentaveis, no. 1.
Puri, Hardeep S, Durga Shanker Mishra, and V. K. Jindal. 2019. “Plastic Waste Management - Issues, Solutions and Case Studies.” In Ministry of Housing & Urban Affairs GovernMent of India, 105–13. https://doi.org/10.1201/9780429059247-7.
Purwanto, and Darmawan. 2017. ‘Modelling of Plastic Waste as an Alternative Building Material in the Form of Bricks’. IJAEMR (International Journal of Advanced Engineering and Management Research) 2 (3): 748–54.
Rahmadiny, Arinda, Novadh Bargreitha, Tommy Anggiawan Putra Pamungkas, Ricky Rialdi Chandra, Mohamed Angky, and Agustinus Agus Setiawan. 2019. ‘Penggunaan Material Limbah High Density Polyetylene (HDPE) Sebagai Bahan Pengganti Agregat Kasar Pada Campuran Beton’. Widyakala Journal 6: 6. https://doi.org/10.36262/widyakala.v6i0.161.
Rai, Baboo, S. Tabin Rushad, Bhavesh Kr, and S. K. Duggal. 2012. ‘Study of Waste Plastic Mix Concrete with Plasticizer’. ISRN Civil Engineering 2012: 1–5. https://doi.org/10.5402/2012/469272.
Raut, Aditya, Mohammad Salman Patel, Nilesh B. Jadhwar, Uzair Khan, and Sagar W. Dhengare. 2015. ‘Investigating the Application of Waste Plastic Bottle as a Construction Material’. Journal of Advance Research in Mechanical and Civil Engineering 2 (3): 86–99.
Rismayasari, Yessi, Utari, and Usman Santosa. 2016. ‘Pembuatan Beton Dengan Campuran Limbah Plastik Dan Karakterisasinya’. Indonesian Journal of Applied Physics 2 (02): 24. https://doi.org/10.13057/ijap.v2i02.1284.
Safinia, Sina, and Amani Alkalbani. 2016. ‘Use of Recycled Plastic Water Bottles in Concrete Blocks’. Procedia Engineering 164 (June): 214–21. https://doi.org/10.1016/j.proeng.2016.11.612.
Sahwan, Firman L, Djoko Heru Martono, Sri Wahyono, and Lies A Wisoyodharmo. 2005. “Sistem Pengelolaan Limbah Plastik Di Indonesia.” Jurnal Sistem Pengolahan Limbah J. Tek. Ling. P3TL-BPPT 6 (1): 311–18.
Said, Juhana, and Sungkono. 2016. ‘Pengolahan Sampah Plastik Dan Tanaman Enceng Gondok Menjadi Bahan Bangunan Alternatif Hemat Energi’. Prosiding Temu Ilmiah IPLBI, no. 1: 187–92.
Satito, Aryo. 2016. ‘Rancang Bangun Mesin Wood Plastic Composite Screw Extrussion Molding (Bagian Dari Prototipe Unit Produksi Panel Komposit Kayu Plastik Untuk Dinding Dan Lantai)’. Prosiding SENTRINOV (Seminar Nasional Terapan Riset Inovatif) 01: 15–16.
Sina, Dantje A. T., I Made Udiana, and Bernad D. Da Costa. 2012. ‘Pengaruh Penambahan Cacahan Limbah Plastik Jenis High Density Polyethylene (HDPE) Pada Kuat Lentur Beton’. Jurnal Teknik Sipil 1 (4).
Sinarep, S., Agus Dwi Catur, and M. Hafidzul. 2014. ‘Redaman Suara Pada Komposit Sandwich Polyester Berpenguat Serat Sisal Dengan Core Styrofoam’. Dinamika Teknik Mesin 4 (1): 30–37. https://doi.org/10.29303/d.v4i1.67.
Singh, Narinder, David Hui, Rupinder Singh, I. P.S. Ahuja, Luciano Feo, and Fernando Fraternali. 2017. “Recycling of Plastic Solid Waste: A State of Art Review and Future Applications.” Composites Part B: Engineering 115: 409–22. https://doi.org/10.1016/j.compositesb.2016.09.013.
Sommerhuber, Philipp F., Johannes Welling, and Andreas Krause. 2015. ‘Substitution Potentials of Recycled HDPE and Wood Particles from Post-Consumer Packaging Waste in Wood-Plastic Composites’. Waste Management 46: 76–85. https://doi.org/10.1016/j.wasman.2015.09.011.
Sormunen, Petri, and Timo Kärki. 2019. ‘Recycled Construction and Demolition Waste as a Possible Source of Materials for Composite Manufacturing’. Journal of Building Engineering 24 (August 2018): 100742. https://doi.org/10.1016/j.jobe.2019.100742.
Sudarmono, Karnawan Joko Setiono, and Dianita Ratna Kusumastuti. 2015. ‘Waste Plastic Bags For Cheap Houses Mixed Concrete Solutions’. Prosiding Sentrinov (Seminar Nasional Terapan Riset Inovatif) 001: 2477–2097.
Sukhwal, Sandeep, Manish Gautam, Bhaskar Jangid, and MD Parwez Musharraf. 2018. ‘Utilization of Waste Material for Manufacturing of Bricks’. Journal of Basic and Applied Engineering Research 5 (2): 103–5.
Sultan, Mohammad, Rahul Jaiswal, Roshan Jaiswal, Falgunee Ram Sahu, Devanand, and Pradeep Nirmal. 2020. ‘Use of Plastic Waste in Civil Constructions and Innovative Decorative Material’. IJIES (International Journal of Innovations in Engineering and Science) 3 (5): 11–15. https://doi.org/10.15406/mojce.2017.03.00082.
Sultan, Mohammad, Rahul Jaiswal, Roshan Jaiswal, Falgunee Ram Sahu, Devannand, and Megha Sahu. 2020. ‘Utilization of Plastic Waste in Manufacturing of Plastic Sand Bricks’. IJIES (International Journal of Innovations in Engineering and Science) 5 (1).
Susilawati, and Indah Wahyuning Tyas. 2018. ‘Lock-Brick System for Sustainable and Environment Infrastructure Building Materials’. IOP Conference Series: Materials Science and Engineering 371 (1). https://doi.org/10.1088/1757-899X/371/1/012016.
https://doi.org/10.1016/j.matdes.2014.03.045
Vebry, Muammar. 2008. “Penggunaan Bahan Bangunan Yang Berkelanjutan Dalam Proses Rekonstruksi Aceh.” UN Habitat Library, no. 3.
Wahid, Siti Aishah, Sullyfaizura Mohd Rawi, and Norlia Md Desa. 2015. ‘Utilization of Plastic Waste in Sand Bricks’. Journal of Basic and Applied Scientific Research 5 (1): 977–82. https://doi.org/10.22214/ijraset.2017.4178.
Wariyatno, Nanang Gunawan, Yanuar Haryanto, and Sumiyanto. 2017. ‘Efektivitas Bata Berongga Sebagai Alternatif Material Pengganti Untuk Dinding’. Jurnal Ilmiah Teknik Sipil 21 (2): 136–42.
Watile, R. K., S. K. Deshmukh, and H. C. Muley. 2014. ‘Interlocking Brick for Sustainable Housing Development’. International Journal of Science, Spirituality, Business and Technology (IJSSBT) 2 (2): 58–64.
Widyawati, Fauzi, and Tsabit Abdi Haqqi. 2020. ‘Pemanfaatan Serat Sisal (Agave Sisalana L.) Dan Limbah Plastik Pet Untuk Pembuatan Bata Ringan CLC (Cellular Lightweight Concrete)’. Jurnal Tambora 4 (1): 21–25.
Al-Fakih, Amin, Bashar S Mohammed, Fadhil Nuruddin, and Ehsan Nikbakht. 2018. ‘Development of Interlocking Masonry Bricks and Its’ Structural Behaviour: A Review Paper’. IOP Conference Series: Earth and Environmental Science 140 (April): 012127. https://doi.org/10.1088/1755-1315/140/1/012127.
Amijaya, Sita Yuliastuti. 2019. ‘Rekayasa Material Plastik Banner Untuk Teknologi Kulit Bangunan (Secondary Facade)’. Media Matrasain 16 (1): 41–47.
Amir, Mardiana, Rita Irmawaty, Muralia Hustim, and Irwan Ridwan Rahim. 2019. ‘Material Konstruksi Dinding Yang Terbuat Dari Pengembangan Komposit Plastik Dan Serat Kenaf Serta Serat Glass’. Prosiding Konferensi Nasional Pascasarjana Teknik Sipil (KNPTS), no. November: 393–405.
Antico, Federico C., María J. Wiener, Gerardo Araya-Letelier, and Raúl Gonzalez Retamal. 2017. ‘Eco-Bricks: A Sustainable Substitute for Construction Materials’. Revista de La Construccion 16 (3): 518–26. https://doi.org/10.7764/RDLC.16.3.518.
Arslan, M. Hakan, and H. Derya Arslan. 2013. ‘Use of Plastic Material for Providing Thermal And Acoustics Comforts in Residence Constructed with RC Tunnel Form System’. CESB (Central Europe Towards Sustainable Building), 301–4. https://doi.org/10.12739/nwsaes.v6i4.5000066927.g5000062294.
Asriza, Ristika Oktavia, Diah Humaira, Sri Hawa Thu Insan, and Zomi. 2019. ‘Sintesis Material Komposit Sampah Plastik Dengan Serbuk Kayu Pelawan (Tristaniopsis Merguensis)’. Prosiding Seminar Nasional Penelitian & Pengabdian Pada Masyarakat 3: 2–5. https://doi.org/https://doi.org/10.33019/snppm.v3i0.1357.
Aubé, Stéphane, Bertin Castonguay, Robert Daoust, and Marcel Thomassen. 2015. ‘Wall with Decorative Facing’. United States Patent.
Awoyera, P. O., and A. Adesina. 2020. ‘Plastic Wastes to Construction Products: Status, Limitations and Future Perspective’. Case Studies in Construction Materials 12: e00330. https://doi.org/10.1016/j.cscm.2020.e00330.
B. Shanmugavalli, K. Gowtham, P. Jeba Nalwin, and B. Eswara Moorthy. 2017. ‘Reuse of Plastic Waste in Paver Blocks’. International Journal of Engineering Research And V6 (02): 313–15. https://doi.org/10.17577/ijertv6is020162.
Bernardi, Lisa, Pedro Gaspar, Javier Ozcoidi, and Manon Randé. 2017. ‘Ecobuild: Plastic Bricks for Sustainable Housing’. Repositori Universitas Pompeu Fabra, 1–60.
Bhushaiah, Rajarapu, Shaik Mohammad, and D Srinivasa Rao. 2019. ‘Study of Plastic Bricks Made From Waste Plastic’. IRJET (International Research Journal of Engineering and Technology) 6 (4): 1122.
Chaurasia, Atul, and Sumit Gangwar. 2019. ‘Reuse of Plastic Bottles as a Construction Material’. IJETR (International Journal of Engineering and Technical Research) 0869 (9).
Chen, Kuo Wei. 2016. ‘Lightweight Brick by Carbon Ash from the Mixed Plastic Waste Treatment Plant’. MATEC Web of Conferences 67. https://doi.org/10.1051/matecconf/20166707025.
D, Maneeth P, Pramod K, Kishor Kumar, and Shanmukha Shetty. 2014. ‘Utilization Of Waste Plastic In Manufacturing Of Plastic-Soil Bricks’. IJERT (International Journal of Engineering Research & Technology) 3 (8): 102.
Danandjaja, James. 2014. “Metode Penelitian Kepustakaan.” Antropologi Indonesia. https://doi.org/10.7454/ai.v0i52.3318.
Deepak, Bansal. 2012. ‘Sustainable Dry Interlocking Block Masonry Construction’. International Brick and Block Masonry Conference. Brazil, 1–11.
Dewangan, Dolly, Pradeep Kumar, Kamini Rathore, Krishna Dwivedi, Avinash Chatuevedi, and Ashutosh Dwivedi. 2020. ‘Utilization of Plastic Waste in Manufacturing of Plastic Sand Bricks’. IJIES (International Journal of Innovations in Engineering and Science) 5 (6): 4.
Fajriyanto, and Feris Firdaus. 2008. ‘Panel Dinding Bangunan Ramah Lingkungan Dari Komposit Limbah Pabrik Kertas (Sludge), Sabut Kelapa Dan Sampah Plastik : Pengaruh Komposisi Bahan Dan Beban Pengempaan Terhadap Kuat Lentur (Bending)’. Prosiding Seminar Nasional Teknoin, Bidang Teknik Mesin, no. January: 55–62.
Ge, Zhi, Hongya Yue, and Renjuan Sun. 2015. ‘Properties of Mortar Produced with Recycled Clay Brick Aggregate and PET’. Construction and Building Materials 93: 851–56. https://doi.org/10.1016/j.conbuildmat.2015.05.081.
Ghofrani, Mohammad, Alireza Ashori, Mohammad Hadi Rezvani, and Farzad Arbabi Ghamsari. 2016. ‘Acoustical Properties of Plywood/Waste Tire Rubber Composite Panels’. Measurement: Journal of the International Measurement Confederation 94: 382–87. https://doi.org/10.1016/j.measurement.2016.08.020.
Hakim, Fadhil Ammar. 2019. ‘Pemanfaatan Bijih Plastik Jenis High Density Polyethylene (HDPE) Sebagai Subtitusi Agregat Pada Bata Beton (Paving Block)’. Dspace UII, 1–11.
Haque, Md Sazzadul. 2019. “Sustainable Use of Plastic Brick from Waste PET Plastic Bottle as Building Block in Rohingya Refugee Camp: A Review.” Environmental Science and Pollution Research 26 (36): 36163–83. https://doi.org/10.1007/s11356-019-06843-y.
Huff, Robert, and Mark Shouldice. 2010. ‘Thin Stone or Brick Veneer Wall System And Clips Therefor’. United States Patent Application Publication.
Intan, Syarifah Keumala, and Sandra Santosa. 2019. ‘Utilization of PTE and LDPE Plastic Waste and Building Material Waste as Bricks’. Korean Journal of Materials Research 29 (10): 603–8. https://doi.org/10.3740/MRSK.2019.29.10.603.
Jasvi, Ali Haider, and D.K. Bera. 2015. ‘Sustainable Use of Low Cost Building Materials in the Rural India’. IJRET (International Journal of Research in Engineering and Technology) 04 (25): 534–77. https://doi.org/10.15623/ijret.2015.0425077.
Juhana, and Sungkono. 2018. “Panel Plastik Bertulang Hemat Energi.” Jurnal Lingkungan Binaan Indonesia 7 (1): 54–59. https://doi.org/10.32315/jlbi.7.1.54.
Kasmudjiastuti, Emiliana, and Arum Yuniari. 2012. ‘Pengaruh Filler PCC (Precipitated Calcium Carbonate) Terhadap Sifat Mekanik, Elektrik, Termal Dan Morfologi Dari Komposit HDPE/PCC’. Majalah Kulit, Karet, Dan Plastik 28 (1): 35. https://doi.org/10.20543/mkkp.v28i1.203.
Kintingu, Simion Hosea. 2009. ‘Design of Interlocking Bricks for Enhanced Wall Construction, Flexibility, Alignment Accuracy and Load Bearing’. A Thesis Submitted for the Degree of PhD at the University of Warwick.
Kurniasari, Angela Evita, Nadya Swastikirana, Ociani Sry Pabinti, and Patricia P. Noviandri. 2019. ‘Pengolahan Limbah Plastik Sebagai Material Alternatif Akustik Ruang’. SMART (Seminar on Architecture Research & Technology) 4 (1): 19–30.
Kurniawan, Oki. 2014. ‘Studi Penanganan Kebisingan Untuk Memperbaiki Kualitas Akustik Ruang Kelas Melalui Pemanfaatan Sampah Kotak Karton Gelombang’. https://doi.org/10.13140/RG.2.2.10517.42727.
Mageswari, Dr.M., J.S. Chiranjeevi, and K. Magesh. 2018. ‘Plastic Bricks’. IRJAET (International Research Journal in Advanced Engineering and Technology) 4 (2): 3167–72.
Manisha, and Navinderdeep Singh. 2017. ‘Investigating Strength and Properties of Ecoladrillo: Eco Bricks’. International Journal of Civil Engineering and Technology 8 (7): 134–42.
Mansour, Ashraf Mansour Habib, and Subhi A. Ali. 2015. ‘Reusing Waste Plastic Bottles as an Alternative Sustainable Building Material’. Energy for Sustainable Development 24: 79–85. https://doi.org/10.1016/j.esd.2014.11.001.
Maowa, Jannatul, and Muhammad Harunur Rashid. 2018. Utilization of Waste Plastic in Manufacturing of Brick. International Energy & Engineering Congress.
Martins, G., F. Antunes, A. Mateus, and C. Malça. 2017. ‘Optimization of a Wood Plastic Composite for Architectural Applications’. Procedia Manufacturing 12 (December 2016): 203–20. https://doi.org/10.1016/j.promfg.2017.08.025.
Mondal, M. K., B. P. Bose, and P. Bansal. 2019. “Recycling Waste Thermoplastic for Energy Efficient Construction Materials: An Experimental Investigation.” Journal of Environmental Management 240 (May 2018): 119–25. https://doi.org/10.1016/j.jenvman.2019.03.016.
Mufika, Neyla Rohmah, Sri Murni Dewi, and Eva Arifi. 2018. ‘The Effect of Plastic Concrete Use on Lightweight Hollow Concrete Brick against Compressive Strength and Flexure Strength With Variations of Fiber Yarn’. Jurnal Mahasiswa Jurusan Teknik Sipil 1 (2).
Muttaqim, Zaennal, and Agus Dwi Anggono. 2017. ‘Pengaruh Variasi Komposisi Antara Limbah Plastik High Density Polyethylene (HDPE) Dan Abu Dasar Batubara Sebagai Material Komposit Dengan Matrik Semen Terhadap Kekuatan Tekan Dan Serapan Air’. Karya Ilmiah Universitas Muhammadiyah Surakarta.
Muyen, Z, TN Barna, and MN Hoque. 2016. ‘Strength Properties of Plastic Bottle Bricks and Their Suitability as Construction Materials in Bangladesh’. Progressive Agriculture 3 (27): 362–68. https://doi.org/https://doi.org/10.3329/pa.v27i3.30833.
Ni`mah, Lailan, Isna Syauqiah, Agus Mirwan, Doni Rahmat Wicakso, and Hesti Wijayanti. 2019. ‘Batako Dari Limbah Botol Plastik : Tinjauan Kuat Tekan’. Al Ulum Sains Dan Teknologi 5 (1): 26–29.
Nugroho, Samsu Adi, Muhammad Dikri Fadilah, Thesalonika Br Ginting, and Asri Nurdiana. 2019. ‘Hexalock Brick : Inovasi Batako Pendukung Konsep Pre-Febricate Building Yang Ringan, Ekonomis Dan Ramah Lingkungan’. Jurnal Proyek Teknik Sipil 2 (1): 25–30.
Pati, Dibya Jivan, Riken Homma, and Kazuhisa Iki. 2015. ‘Plastic Bottle Masonry as Alternate Solution to Housing Problems in Urban Areas of India’. Applied Sciences, Engineering & Technology, no. October.
Patil, Ushadevi, Dheeraj Chavan, Yogesh Rai, Rushikesh Surwase, Tejas B Thombare, Sujit B Patil, and Akshay Shinde. 2018. ‘Utilization of Waste PET Bottles and Brick Kiln Dust as Construction Material for Low Cost Housing’. International Journal of Research in Engineering, Science and Management 1 (6): 13–15.
Pradono, Budi. 2019. ‘The Interiority of Proximity Between Nature and Architecture in Contemporary and Tropically Context with Cases Studies’. ARTEKS : Jurnal Teknik Arsitektur 3 (2): 129–44. https://doi.org/10.30822/arteks.v3i2.63.
Pramitasari, Putri Herlia. 2017. ‘Panel Dinding Berventilasi (Breathing Wall) Pada Selubung Bangunan Di Daerah Beriklim Tropis Lembab’. Spectra XV (29): 1–12.
Prastyatama, Budianastas, and Anastasia Maurina. 2018. ‘Kinerja Struktural Interlocking Compressed Earth Block (ICEB) Dengan Serta Ijuk Sebagai Stabilisator’. ARTEKS : Jurnal Teknik Arsitektur 3 (1): 27–36. https://doi.org/10.30822/arteks.v3i1.51.
Pratikto. 2010. ‘Beton Ringan Ber-Agregat Limbah Botol Plastik Jenis PET (Poly Ethylene Terephthalate)’. Jurnal Rekayasa Sipil 9 (1): 1–8.
Previatti, Bruna, Carolina Werlang Fazenda, Fernanda dos Santos Machry, and Rafaela Diehl Milani. 2016. ‘Análise de Implantação de Uma Residência Sustentável Em Passo Fundo - BR’. Seminario Internacional de Construcoes Sustentaveis, no. 1.
Puri, Hardeep S, Durga Shanker Mishra, and V. K. Jindal. 2019. “Plastic Waste Management - Issues, Solutions and Case Studies.” In Ministry of Housing & Urban Affairs GovernMent of India, 105–13. https://doi.org/10.1201/9780429059247-7.
Purwanto, and Darmawan. 2017. ‘Modelling of Plastic Waste as an Alternative Building Material in the Form of Bricks’. IJAEMR (International Journal of Advanced Engineering and Management Research) 2 (3): 748–54.
Rahmadiny, Arinda, Novadh Bargreitha, Tommy Anggiawan Putra Pamungkas, Ricky Rialdi Chandra, Mohamed Angky, and Agustinus Agus Setiawan. 2019. ‘Penggunaan Material Limbah High Density Polyetylene (HDPE) Sebagai Bahan Pengganti Agregat Kasar Pada Campuran Beton’. Widyakala Journal 6: 6. https://doi.org/10.36262/widyakala.v6i0.161.
Rai, Baboo, S. Tabin Rushad, Bhavesh Kr, and S. K. Duggal. 2012. ‘Study of Waste Plastic Mix Concrete with Plasticizer’. ISRN Civil Engineering 2012: 1–5. https://doi.org/10.5402/2012/469272.
Raut, Aditya, Mohammad Salman Patel, Nilesh B. Jadhwar, Uzair Khan, and Sagar W. Dhengare. 2015. ‘Investigating the Application of Waste Plastic Bottle as a Construction Material’. Journal of Advance Research in Mechanical and Civil Engineering 2 (3): 86–99.
Rismayasari, Yessi, Utari, and Usman Santosa. 2016. ‘Pembuatan Beton Dengan Campuran Limbah Plastik Dan Karakterisasinya’. Indonesian Journal of Applied Physics 2 (02): 24. https://doi.org/10.13057/ijap.v2i02.1284.
Safinia, Sina, and Amani Alkalbani. 2016. ‘Use of Recycled Plastic Water Bottles in Concrete Blocks’. Procedia Engineering 164 (June): 214–21. https://doi.org/10.1016/j.proeng.2016.11.612.
Sahwan, Firman L, Djoko Heru Martono, Sri Wahyono, and Lies A Wisoyodharmo. 2005. “Sistem Pengelolaan Limbah Plastik Di Indonesia.” Jurnal Sistem Pengolahan Limbah J. Tek. Ling. P3TL-BPPT 6 (1): 311–18.
Said, Juhana, and Sungkono. 2016. ‘Pengolahan Sampah Plastik Dan Tanaman Enceng Gondok Menjadi Bahan Bangunan Alternatif Hemat Energi’. Prosiding Temu Ilmiah IPLBI, no. 1: 187–92.
Satito, Aryo. 2016. ‘Rancang Bangun Mesin Wood Plastic Composite Screw Extrussion Molding (Bagian Dari Prototipe Unit Produksi Panel Komposit Kayu Plastik Untuk Dinding Dan Lantai)’. Prosiding SENTRINOV (Seminar Nasional Terapan Riset Inovatif) 01: 15–16.
Sina, Dantje A. T., I Made Udiana, and Bernad D. Da Costa. 2012. ‘Pengaruh Penambahan Cacahan Limbah Plastik Jenis High Density Polyethylene (HDPE) Pada Kuat Lentur Beton’. Jurnal Teknik Sipil 1 (4).
Sinarep, S., Agus Dwi Catur, and M. Hafidzul. 2014. ‘Redaman Suara Pada Komposit Sandwich Polyester Berpenguat Serat Sisal Dengan Core Styrofoam’. Dinamika Teknik Mesin 4 (1): 30–37. https://doi.org/10.29303/d.v4i1.67.
Singh, Narinder, David Hui, Rupinder Singh, I. P.S. Ahuja, Luciano Feo, and Fernando Fraternali. 2017. “Recycling of Plastic Solid Waste: A State of Art Review and Future Applications.” Composites Part B: Engineering 115: 409–22. https://doi.org/10.1016/j.compositesb.2016.09.013.
Sommerhuber, Philipp F., Johannes Welling, and Andreas Krause. 2015. ‘Substitution Potentials of Recycled HDPE and Wood Particles from Post-Consumer Packaging Waste in Wood-Plastic Composites’. Waste Management 46: 76–85. https://doi.org/10.1016/j.wasman.2015.09.011.
Sormunen, Petri, and Timo Kärki. 2019. ‘Recycled Construction and Demolition Waste as a Possible Source of Materials for Composite Manufacturing’. Journal of Building Engineering 24 (August 2018): 100742. https://doi.org/10.1016/j.jobe.2019.100742.
Sudarmono, Karnawan Joko Setiono, and Dianita Ratna Kusumastuti. 2015. ‘Waste Plastic Bags For Cheap Houses Mixed Concrete Solutions’. Prosiding Sentrinov (Seminar Nasional Terapan Riset Inovatif) 001: 2477–2097.
Sukhwal, Sandeep, Manish Gautam, Bhaskar Jangid, and MD Parwez Musharraf. 2018. ‘Utilization of Waste Material for Manufacturing of Bricks’. Journal of Basic and Applied Engineering Research 5 (2): 103–5.
Sultan, Mohammad, Rahul Jaiswal, Roshan Jaiswal, Falgunee Ram Sahu, Devanand, and Pradeep Nirmal. 2020. ‘Use of Plastic Waste in Civil Constructions and Innovative Decorative Material’. IJIES (International Journal of Innovations in Engineering and Science) 3 (5): 11–15. https://doi.org/10.15406/mojce.2017.03.00082.
Sultan, Mohammad, Rahul Jaiswal, Roshan Jaiswal, Falgunee Ram Sahu, Devannand, and Megha Sahu. 2020. ‘Utilization of Plastic Waste in Manufacturing of Plastic Sand Bricks’. IJIES (International Journal of Innovations in Engineering and Science) 5 (1).
Susilawati, and Indah Wahyuning Tyas. 2018. ‘Lock-Brick System for Sustainable and Environment Infrastructure Building Materials’. IOP Conference Series: Materials Science and Engineering 371 (1). https://doi.org/10.1088/1757-899X/371/1/012016.
https://doi.org/10.1016/j.matdes.2014.03.045
Vebry, Muammar. 2008. “Penggunaan Bahan Bangunan Yang Berkelanjutan Dalam Proses Rekonstruksi Aceh.” UN Habitat Library, no. 3.
Wahid, Siti Aishah, Sullyfaizura Mohd Rawi, and Norlia Md Desa. 2015. ‘Utilization of Plastic Waste in Sand Bricks’. Journal of Basic and Applied Scientific Research 5 (1): 977–82. https://doi.org/10.22214/ijraset.2017.4178.
Wariyatno, Nanang Gunawan, Yanuar Haryanto, and Sumiyanto. 2017. ‘Efektivitas Bata Berongga Sebagai Alternatif Material Pengganti Untuk Dinding’. Jurnal Ilmiah Teknik Sipil 21 (2): 136–42.
Watile, R. K., S. K. Deshmukh, and H. C. Muley. 2014. ‘Interlocking Brick for Sustainable Housing Development’. International Journal of Science, Spirituality, Business and Technology (IJSSBT) 2 (2): 58–64.
Widyawati, Fauzi, and Tsabit Abdi Haqqi. 2020. ‘Pemanfaatan Serat Sisal (Agave Sisalana L.) Dan Limbah Plastik Pet Untuk Pembuatan Bata Ringan CLC (Cellular Lightweight Concrete)’. Jurnal Tambora 4 (1): 21–25.