Utilization of building design performance simulation in the architectural design studio process

MD Krisna Adya Anindita; Frengky Benediktus Ola; Natalia Suwarno; Nimas Sekarlangit

doi:10.30822/arteks.v7i2.1391

Authors

MD Krisna Adya Anindita Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta , Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta
Frengky Benediktus Ola Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta , Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta https://orcid.org/0000-0003-2049-6050 (unauthenticated)
Natalia Suwarno Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta , Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta https://orcid.org/0000-0002-3844-0023 (unauthenticated)
Nimas Sekarlangit Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta , Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta https://orcid.org/0000-0002-5018-5811 (unauthenticated)

DOI:

https://doi.org/10.30822/arteks.v7i2.1391

Keywords:

Architectural design, Building performance, Building simulation, Studio process

Abstract

Design is a unified system consists of parameters that influence each other, so design considerations must be careful. Building design performance is a measurable parameter, and integrating the planning and design process can make decision-making more focused and measurable. This paper describes the benefits and constraints of integrating building design performance simulations in the architectural studio design process using a design process of the Student Learning and Innovation Center. The study emphasizes cooling loads and daylighting using building design performance simulation to analyze the design form, layout, and building skin through shading study, UTCI, thermal comfort, wind, solar radiation, daylight, and cooling loads. Simulation using ladybug, honeybee, and sefaira software. The result is BPS utilization in the design process can assist designers in considering strategic design decisions when the problem is simple or aims to study climatic conditions. When the design problem is complex or requires detailed simulation, BPS utilization in the design process becomes more complicated so that the potential for simulation errors is more significant.

Downloads

Download data is not yet available.

Author Biographies

MD Krisna Adya Anindita, Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta, Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta

MD Krisna Adya Anindita contributed to the research concepts preparation, methodologies, investigations, data analysis, visualization, articles drafting and revisions.
Frengky Benediktus Ola, Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta, Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta

Frengky Benediktus Ola contribute to the research concepts preparation and literature reviews, data analysis, of article drafts preparation and validation.
Natalia Suwarno, Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta, Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta

Natalia Suwarno contribute to methodology, supervision, and validation.
Nimas Sekarlangit, Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta, Architecture Study Program, Faculty of Engineering, Universitas Atma Jaya Yogyakarta

Nimas Sekarlangit contribute to the research concepts preparation and literature reviews.

References

Almutairi, Meshal F., and Raed I. Bourisli. 2017. ‘Optimum Orientation of a Mutually-Shaded Group of Buildings with Respect to External Solar Radiation’. Journal of Thermal Engineering 3 (1): 1065–1065. https://doi.org/10.18186/thermal.290262.

Ardington, Angela, and Helen Drury. 2017. ‘Design Studio Discourse in Architecture in Australia: The Role of Formative Feedback in Assessment’. Art, Design & Communication in Higher Education 16 (2): 157–70. https://doi.org/10.1386/adch.16.2.157_1.

Borrallo-Jiménez, Milagrosa, Maria LopezDeAsiain, Paula M. Esquivias, and David Delgado-Trujillo. 2022. ‘Comparative Study between the Passive House Standard in Warm Climates and Nearly Zero Energy Buildings under Spanish Technical Building Code in a Dwelling Design in Seville, Spain’. Energy and Buildings 254 (January): 111570. https://doi.org/10.1016/j.enbuild.2021.111570.

Brown, Nathan C. 2019. ‘Early Building Design Using Multi-Objective Data Approach’. MIT Libraries. Massachusetts Institute of Technology. https://dspace.mit.edu/handle/1721.1/123573.

Cardiah, Tita, and Irwan Sudarisman. 2018. ‘Exploration Of Themes And Design Concepts As A Communication Form In Architecture’. In Proceedings of the 3rd International Conference on Creative Media, Design and Technology (REKA 2018). Paris, France: Atlantis Press. https://doi.org/10.2991/reka-18.2018.15.

Emam, Maii, Dina Taha, and Zeyad ElSayad. 2019. ‘Collaborative Pedagogy in Architectural Design Studio: A Case Study in Applying Collaborative Design’. Alexandria Engineering Journal 58 (1): 163–70. https://doi.org/10.1016/j.aej.2018.03.005.

Fernandez-Antolin, Maria-Mar, José del Río, Vincenzo Costanzo, Francesco Nocera, and Roberto-Alonso Gonzalez-Lezcano. 2019. ‘Passive Design Strategies for Residential Buildings in Different Spanish Climate Zones’. Sustainability 11 (18): 4816. https://doi.org/10.3390/su11184816.

Frick, Heinz, Antonius Ardiyanto, and AMS Darmawan. 2008. Ilmu Fisika Bangunan. Yogyakarta: Kanisius.

Gaspari, J., K. Fabbri, T. Cancellari, G. Corazzi, and V. Vodola. 2017. ‘The Use of Building Performance Simulation to Support Architectural Design: A Case Study’. Energy Procedia 122 (September): 205–10. https://doi.org/10.1016/j.egypro.2017.07.346.

GBCI. 2013. ‘Perangkat Penilaian GREENSHIP (GREENSHIP Rating Tools)’. Greenship New Building Versi 1.2. Jakarta, Indonesia. https://www.gbcindonesia.org/files/resource/9b552832-b500-4b73-8c0e-acfaa1434731/Summary GREENSHIP New Building V1.2.pdf.

Han, Yilong, and John E. Taylor. 2015. ‘Disaggregate Analysis of the Inter-Building Effect in a Dense Urban Environment’. Energy Procedia 75 (August): 1348–53. https://doi.org/10.1016/j.egypro.2015.07.208.

Hernandez Neto, Alberto. 2019. ‘Teaching Building Performance Simulation: Considerations on Methodologies and Course Levels’. International Journal of Mechanical Engineering Education 47 (4): 293–314. https://doi.org/10.1177/0306419018775596.

Hettithanthri, Upeksha, and Preben Hansen. 2022. ‘Design Studio Practice in the Context of Architectural Education: A Narrative Literature Review’. International Journal of Technology and Design Education 32 (4): 2343–64. https://doi.org/10.1007/s10798-021-09694-2.

Ianni, Manuela, and Michelle Sánchez de León. 2013. ‘Applying Energy Performance-Based Design in Early Design Stages’. In Proceedings of the 31st International Conference on Education and Research in Computer Aided Architectural Design in Europe (ECAADe) [Volume 1], 1:31–40. https://doi.org/10.52842/conf.ecaade.2013.1.031.

Jamrozik, Anja, Nicholas Clements, Syed Shabih Hasan, Jie Zhao, Rongpeng Zhang, Carolina Campanella, Vivian Loftness, et al. 2019. ‘Access to Daylight and View in an Office Improves Cognitive Performance and Satisfaction and Reduces Eyestrain: A Controlled Crossover Study’. Building and Environment 165 (November): 106379. https://doi.org/10.1016/j.buildenv.2019.106379.

Jordan, Nadia Almira, Tiara Rukmaya Dewi, Muhammad Yogi Raditya, and Denny Huldiansyah. 2021. ‘Appropriate Site Development : Microclimatic Approach Toward Green Landscape Design’, no. November: 1–7.

Macia, Narciso, John-Paul Ishioye, Brigid Dotson, and Maria Macia. 2008. ‘Impact Of Shading On Cooling And Heating Load’. In 2008 Annual Conference & Exposition Proceedings, 13.695.1-13.695.9. ASEE Conferences. https://doi.org/10.18260/1-2--4393.

Maleki, B Ahmadkhani. 2011. ‘Shading: Passive Cooling and Energy Conservation in Building’. International Journal on Technical and Physical Problems of Engineering 3 (9): 72–79. http://www.iotpe.com/IJTPE/IJTPE-2011/IJTPE-Issue9-Vol3-No4-Dec2011/11-IJTPE-Issue9-Vol3-No4-Dec2011-pp72-79.pdf.

Massetti, Marco, and Stefano Paolo Corgnati. 2011. ‘Energy Simulation Supporting the Building Design Process A Case Study at the Early Design Stage’. The Third International Conference on Advances in System Simulation, 136–41.

Oluwatayo, Adedapo, Sanuel Olademehin, Adebambo Adewakun, Heritage Pirisola, Oluwole Alagbe, Peter Aderonmu, and Omoyeni Fulani. 2017. ‘Impact of The Architectural Design Process on Students Performance in Design Studio Projects’. In International Technology, Education and Development Conference, 5493–5501. Valencia, Spain. https://doi.org/10.21125/inted.2017.1284.

Østergård, Torben, Rasmus L. Jensen, and Steffen E. Maagaard. 2016. ‘Building Simulations Supporting Decision Making in Early Design – A Review’. Renewable and Sustainable Energy Reviews 61 (August): 187–201. https://doi.org/10.1016/j.rser.2016.03.045.

PEEB. 2020. ‘Better Design for Cool Buildings: How Improved Building Design Can Reduce the Massive Need for Space Cooling in Hot Climates’. Paris, France. https://www.peeb.build//imglib/downloads/PEEB_Cool Buildings_Working Paper_August 2020.pdf.

Satwiko, Prasasto. 2005. Arsitektur Sadar Energi: Pemanfaatan Komputer Dan Internet Untuk Merancang Bangunan Ramah Lingkungan. ANDI Yogyakarta.

SNI. 2001. ‘Tata Cara Perancangan Sistem Ventilasi Dan Pengkondisian Udara Pada Bangunan Gedung’. Sni 03 - 6572 - 2001. Jakarta. http://staffnew.uny.ac.id/upload/132100514/pendidikan/perencanaan-pendingin.pdf.

———. 2011. ‘SNI 6197: 2011 Konservasi Energi Pada Sistem Pencahayaan’. Standar Nasional Indonesia. Jakarta. http://www.iaeeta.org/wp-content/uploads/2017/08/sni-03-6197-2000-Pencahayaan.pdf.

U.S. Green Building Council. 2013. LEED v4: Reference Guide for Building Design and Construction. Washington D.C.: U.S. Green Building Council.

Wate, Parag, Volker Coors, Marco Iglesias, and Darren Robinson. 2019. ‘Uncertainty Assessment of Building Performance Simulation’. In Urban Energy Systems for Low-Carbon Cities, 257–87. Elsevier. https://doi.org/10.1016/B978-0-12-811553-4.00007-X.

WHO. 2009. Natural Ventilation for Infection Control in Health-Care Settings. Edited by James Atkinson, Chartier Yves, Carmen Lucia Pessoa-Silva, Paul Jensen, Yuguo Li, and Wing-Hong Seto. Geneva: WHO. https://www.who.int/water_sanitation_health/publications/natural_ventilation.pdf.